FF1: System Programming Section 400-ProgrammingPage 1-106 l DBS 576 (USA) issued 05/20/98 576-13-400FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1 0 21: Ring Alarm for Unanswered CallsNotes:Alarm Ringing: Ringing frequency/interval changes for an incoming call that rings unanswered forlonger than the Slide Ring/Alarm Ring Timer.Alarm Ringing will not work while Slide Ringing or Delayed Ringing is occurring.Related Programming:Slide Ring/Alarm Ring Timer (Day1) (pg. 1-132) FF1 1 02 0007 Hold (0-255) HoldSlide Ring/Alarm Ring Timer (Day2) (pg. 1-133) FF1 1 02 0008 Hold (0-255) HoldSlide Ring/Alarm Ring Timer (Night) (pg. 1-133) FF1 1 02 0009 Hold (0-255) HoldAlarm Ringing (pg. 2-24) (for analog CO trunks) FF2 0 BSSC 02 13 Hold (0 or 1) HoldAlarm Ringing (pg. 2-68) (for ISDN trunks) FF2 1 BSSC 03 06 Hold (0 or 1) HoldAlarm Ringing (pg. 2-102) (for T1 CO trunks) FF2 2 BSSCC 03 11 Hold (0 or 1) HoldRing Alarm Frequency(all CPCs) - Version 1.0 or higherSet the ringing frequency that will begin after an incoming call rings unanswered forlonger than the Slide Ring/Alarm Ring Timer.FF1 0 21 0001 Hold (0-6) Hold0=no ring1=400/562 Hz (default)2=1000/1340 Hz3=400 Hz4=800/1040 Hz5=1040/1320 Hz6=660/1320 Hz /52 "*D
