FF1: System Programming Section 400-ProgrammingPage 1-112 l DBS 576 (USA) issued 05/20/98 576-13-400FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1 0 25: Caller ID Add DigitsNotes:On 44-series display phones, press the left soft key next to the displayed Caller ID Log phone number,to automatically seize MCO-1 (“9”) and outdial the Add Digits and the number. On 43-series displayphones, press the AUTO key.To outdial “9” and the Caller ID Log phone number without the Add Digits in front of it, press the rightsoft key (or, on 43-series display phones, press REDIAL).A maximum of 20 extension phones per cabinet can have the Caller ID Log feature. It will store anddisplay the last 10 Caller ID calls received at that extension. To display the Log, press CONF 96 atintercom dial tone.The Add Digits and the Caller ID phone number are subject to ARS/TRS after the “9” is dialed. Theycan be redialed by pressing the REDIAL key. SMDR reports will show the first 24 digits of a Caller IDphone number that was outdialed (SMDR must be set to Format #2 in FF1 0 09). Caller ID informationwill also be sent to an installed TAPI device.Related Programming:Caller ID Log Outgoing Control (pg. 1-20) FF1 0 01 0021 Hold (0 or 1) HoldCaller ID Log Private/Out-of-Area Control (pg. 1-20) FF1 0 01 0022 Hold (0 or 1) HoldSMDR Output Format (pg. 1-93) FF1 0 09 0001 Hold (0-2) HoldCaller ID Log Outgoing Add Digits(all CPCs) - Version 1.0 or higherEnter the digits (up to 4) that will be added to the beginning of an outgoingCaller ID number (selected from the displayed Caller ID Log).FF1 0 25 0001 Hold (up to 4 char.) HoldCaller ID Add Digits (up to 4 characters,default: [no assignment]including 0-9, Q, and #) / ,
