Section 400-Programming FF1: System Programming576-13-400 DBS 576 (USA) issued 05/20/98 l Page 1-163FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1 3: MCO Access in Tenant GroupsNOTE: Tenant Groups provide a way to divide the phone system into differentdepartments, or even different companies sharing the same phone system, forinbound and outbound calls.Available range of MCO Tenant Groups depends on the CPC card used:up to 12 Tenant Groups with a CPC-96up to 36 Tenant Groups with a CPC-288up to 72 Tenant Groups with a CPC-576.r Individual trunks are assigned to Tenant Groups in FF2. default: 0 (no assignment)r Individual extensions are assigned to Tenant Groups in FF3. default: Tenant Group 1r Trunks are assigned to Outbound Trunk Groups in FF5 - 2. default: (no assignment)r Outbound Trunk Groups are assigned to Tenant Groups in:Tenant Group MCO Access: Outbound Trunk Groups (see below)FF1 3 01 (0001-0360) Hold (0-99 or 0-72) Holddefaults:Tenant 1/MCO-1=TG#1Tenant 2/MCO-1=TG#2Tenant 3/MCO-1=TG#3etc.r Extension COS: Direct Trunk Access (pg. 1-46)FF1 0 03 (00-15) 13 Hold (0 or 1) Hold0=allow 1=do not allowdefault: 0 (allow)r TRS Level for Path (non-ARS) (pg. 6-16)FF6 1 00 (01-50) Hold (0001-0099) Hold (0-9) Hold(01-50): TRS Class No. of originating extension.(0001-0099): Trunk Group No. of seized trunk(0-9): TRS Levels: 0=restrict all calls ... 9=allow all callsdefault: 9 (allow all calls)r Route Table: Trunk Group Assignment (pg. 6-36)FF6 2 04 (001-200) 0001 Hold (0-99) Hold(001-200): Route No.(0-99): Trunk Group No.default: 0 (no assignment)
