FF2: Trunk Programming (T1 CO) Section 400-ProgrammingPage 2-90 l DBS 576 (USA) issued 05/20/98 576-13-400FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BNotes:If CO is set to Immediate Start, system will wait this long before recognizing ring from CO.This setting is available only if the Trunk Signal Type is set for “2” (DID Immediate Start) or “3” (DIDWink Start); it is not available for Loop Start or Ground Start signaling types.Related Programming:Trunk Signal Type (pg. 2-87) FF2 2 BSSCC 02 00 Hold (0-3) HoldNotes:This setting is available only for Channel 01.“SF” stands for SuperFrame (also known as D4), in which sampling frames are transmitted in groups of12.“ESF” stands for Extended SuperFrame, in which sampling frames are transmitted in groups of 24. ESFprovides monitoring and maintenance capabilities that aren’t available with SF.Both “SF” and “ESF” use robbed-bit signaling, in which the 8th bit is robbed from every 6th frame totransmit signaling states such as On-Hook and Off-Hook.Not Used(all CPCs) - Version 1.0 or higherFF2 2 BSSCC 02 05 Hold $ )! B Frame Format(all CPCs) - Version 1.0 or higherSet the framing format ordered from the CO (assign to Channel #1).FF2 2 BSSCC 02 06 Hold (0 or 1) Hold0=SF (default)BSSCC: T1 (CO) Channel Position (“01” only)B=Cabinet no. 1-6SS=Slot no. 01-12CC=Channel no. 011=ESF $ " "!
