Section 400-Programming FF8: Maintenance576-13-400 DBS 576 (USA) issued 05/20/98 l Page 8-23FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF8 0 04: Card SettingsNotes:When you reset a card, the system will display the next card. You can then reset the card in the free slot.Even if the display shows “0” (Not installed, or idle), you can reset the card.If the entered card position is an EXT (extension) card, only “0” (Not installed, or idle) is available fordisplay.Related Programming:Notes:The Card Type No. displayed will not match the card’s address entry in Free Slot/Option SlotAssignment (see 0: System Configuration). The table below shows the actual values for the displayedCard Type No.Related Programming:Free Slot Assignment (pg. 0-5) 01 (1-6) (01-12) Hold (1-99) HoldOption Slot Assignment (pg. 0-6) 02 (1-6) (13 or 14) Hold (50) HoldCard Reset(all CPCs) - Version 1.0 or higherReset a card if the system cannot communicate with it.FF8 0 04 0 BSS Hold (0 or 1) (Flash + Hold)BSS: Card PositionB=Cabinet no. 1-6SS=Slot no. 01-120=Not installed, or idle1=Installed and busy.(no communication).(press FLASH* and Holdsimultaneously) -programmed via FF-key.*Not available for FLASH,Card Type Verification(all CPCs) - Version 1.0 or higherVerifies the existing card type. For display only (you cannot change the card type).FF8 0 04 1 BSS 00 Hold [01-99 displays]BSS: Card PositionB=Cabinet no. 1-6SS=Slot no. 01-14Card Type Setting 01-99(see table below for values) $
