Section 400-Programming FF3: Extension Programming576-13-400 DBS 576 (USA) issued 05/20/98 l Page 3-13FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BNotes:Even if this is set to “Disable,” the phone’s LCD display will indicate the Message-Waiting.(all CPCs - Version 1.3 and higher) Message-Waiting can now be sent during a Voice call without firsthaving to switch to Tone calling.Related Programming:Extension COS: Message Waiting Send (pg. 1-55) FF1 0 03 (00-15) 25 Hold (0 or 1) HoldNotes:Set this address to “1” (Do not allow intterruptions) to protect data transmissions from beinginterrupted.Related Programming:Message Waiting LED(all CPCs) - Version 1.0 or higherEnable/Disable Message Waiting LED on the extension for messages receivedfrom other extensions.FF3 0 BSSC 04 09 Hold (0 or 1) HoldBSSC: Extension PortB=Cabinet no. 1-6SS=Slot no. 01-12C=Circuit no. 1-80=Disable Message Waiting LED.1=Enable Message Waiting LED. (default) $ &2A 5* !!,Data Security(all CPCs) - Version 1.0 or higherEnable/Disable interruptions such as Busy Override-Receive on this extension.FF3 0 BSSC 04 10 Hold (0 or 1) HoldBSSC: Extension PortB=Cabinet no. 1-6SS=Slot no. 01-12C=Circuit no. 1-80=Allow interruptions on this extension.(default)1=Do not allow interruptions. $ '-
