Section 400-Programming FF2: Trunk Programming (Analog CO)576-13-400 DBS 576 (USA) issued 05/20/98 l Page 2-25FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BNotes:Slide Ringing: Applies to extensions that are Slide Ringing-enabled and have trunk FF-keyassignments (where the trunk is also enabled for Slide Ringing in the above address). An incoming callon the trunk will ring at the assigned extension or hunt group first (see Day1/2/Night RingAssignments in FF2). Then, after the Slide Ring/Alarm Ring Timer expires, the call will also beginringing at the extension(s) that have an FF-key for the trunk (see FF-Key Feature Assignment in FF4).Related Programming:Slide Ring/Alarm Ring Timer (Day1) (pg. 1-132) FF1 1 02 0007 Hold (0-255) HoldSlide Ring/Alarm Ring Timer (Day2) (pg. 1-133) FF1 1 02 0008 Hold (0-255) HoldSlide Ring/Alarm Ring Timer (Night) (pg. 1-133) FF1 1 02 0009 Hold (0-255) HoldSlide Ringing Receive (pg. 3-9) on individual extensions FF3 0 BSSC 04 02 Hold (0 or 1) HoldRing Type/Destination - Day1, Day2, Night (pg. 2-28) FF2 0 BSSC 03 (0-5) Hold (0-6 or 0-9999) HoldFF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7) FF4 0 BSSC 0 (01-32) Hold FLASH(Code) HoldSlide Ringing(all CPCs) - Version 1.0 or higherEnable/Disable Slide Ringing for incoming calls on this trunk that ringunanswered for longer than the Slide Ring/Alarm Ring Timer.FF2 0 BSSC 02 14 Hold (0 or 1) Hold0=Disable Slide Ringing. (default)BSSC: Analog (CO) Trunk PositionB=Cabinet no. 1-6SS=Slot no. 01-12C=Circuit no. 1-81=Enable Slide Ringing. $ ,
