Section 400-Programming FF8: Maintenance576-13-400 DBS 576 (USA) issued 05/20/98 l Page 8-5FF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BFF1SystemFF2TrunksFF3ExtensionsFF4FF-/Soft KeysFF5GroupsFF6TRS/ARS0 SystemConfigurationFF7ApplicationsFF8MaintenanceIntroductionAppendix AAppendix BTable 8-1. List of Available Feature CodesNOTE: All features can be programmed on FF-Keys, and most (but not all) can also be programmed onSoft Keys (the “Soft Key” column will be shaded for exceptions). Also, some features cannot beassigned a Flexible Code for end-users, and can be set only in Programming Mode (the “End-User” column will be shaded for these exceptions).Feature Description Fixed Feature Code+ (additional digits toprogram into key)End-User Soft KeyCO Trunk Key # + (Trunk 1-576)MCO Trunk Key For incoming and outgoingcalls.MCO No. 1 = ”9” access codeMCO No. 2 = “81” access codeMCO No. 3 = “82” access codeMCO No. 4 = “83” access codeMCO No. 5 = “84” access code1 + (MCO 1-5) + (MCO-Incoming Group 00-99)Virtual Port Key ∗9 + (Virtual Port 001-576)DSS/BLF - Outgoing only Call ext. / View status only. 9 + (Extension 0-9999) End-User Soft KeyDSS/BLF - Immediate Ring Call ext. / View status /Also rings immediately forincoming call (can answer).81+(Extension 0-9999) End-UserDSS/BLF - Delayed Ring Call ext. / View status /Also delay-rings incoming call(can answer).82+(Extension 0-9999) End-UserDSS/BLF - Flash/No-Ring Call ext. / View status /Also flashes for incoming call(can answer).83+(Extension 0-9999) End-UserBuilt-In VM Unit #1:Mailbox AccessAccess mailbox options. 61 + (Mailbox No. 00-9999)Built-In VM Unit #2:Mailbox AccessAccess mailbox options. 62 + (Mailbox No. 00-9999)Built-In VM Unit #3:Mailbox AccessAccess mailbox options. 63 + (Mailbox No. 00-9999)Built-In VM Unit #4:Mailbox AccessAccess mailbox options. 64 + (Mailbox No. 00-9999)Built-In VM Unit #1:Message BroadcastCopy a recording to other(pre-programmed) mailboxes.61 + (Broadcast Code 00-9999)Built-In VM Unit #2:Message BroadcastCopy a recording to other(pre-programmed) mailboxes.62 + (Broadcast Code 00-9999)Built-In VM Unit #3:Message BroadcastCopy a recording to other(pre-programmed) mailboxes.63 + (Broadcast Code 00-9999)Built-In VM Unit #4:Message BroadcastCopy a recording to other(pre-programmed) mailboxes.64 + (Broadcast Code 00-9999)Built-In VM: RetrieveMessagesListen to messages in mailbox. 5 + (Mailbox No. 00-9999)Built-In VM: Start/Restart 2-Way Call Recording ∗#50Built-In VM: Stop 2-Way Call Recording ∗#51Built-In VM: Re-Record (over the same call)2-Way Call Recording∗#52Built-In VM: Pause 2-Way Call Recording ∗#53Built-In VM: Stop/End 2-Way Call Recording ∗#54
