Panasonic PT-MZ670 Operating Instructions Manual

Also see for PT-MW530: Operating instructions Operating instructions Operating instructions

Contents

Panasonic PT-MZ670 Operating Instructions Manual Manual pdf 100 page image

Chapter 4 Settings — [DISPLAY OPTION] menu100 - ENGLISH[SCREEN SETTING]Set the screen size.Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed.Set as necessary for the screen in use.1) Press as to select [SCREEN SETTING].2) Press the button.f The [SCREEN SETTING] screen is displayed.3) Press qw to switch the [SCREEN FORMAT] item.f The items will switch each time you press the button.Model No. [SCREEN FORMAT] Range when [SCREEN POSITION] is selectedPT-MZ670PT-MZ570[16:10] Cannot be adjusted.[4:3] Adjusts the horizontal position between -160 and 160.[16:9] Adjusts the vertical position between -60 and 60.PT-MW630PT-MW530[16:10] Cannot be adjusted.[4:3] Adjusts the horizontal position between -107 and 107.[16:9] Adjusts the vertical position between -40 and 40.4) Press as to select [SCREEN POSITION].f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].5) Press qw to adjust [SCREEN POSITION].[AUTO SIGNAL]Set whether to execute automatic setup of signals automatically.The screen display position or signal level can be adjusted automatically without pressing the CANCEL> button on the remote control on each occasion if you input unregistered signals frequently at meetings,etc.1) Press as to select [AUTO SIGNAL].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Sets the auto signal function to off.[ON] Executes automatic setup automatically when images are changed to unregistered signals duringprojection.[AUTO SETUP]Set this function when adjusting a special signal for still image signal, or horizontally long (such as 16:9) signal.Setting with [MODE]1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [MODE].4) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Standard setting.[WIDE] Select this item when an image aspect ratio is a wide-screen signal, which does not meet the[DEFAULT] setting.[USER] Select this when receiving a signal with a special horizontal resolution (number of display dots).f Proceed to Step 7) when [DEFAULT] or [WIDE] is selected.