Chapter 4 Settings — [PROJECTOR SETUP] menu122 - ENGLISH[AUDIO SETTING]Set audio functions in detail.Adjusting the volume1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [VOLUME].4) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress w. Increases the volume. 0 - 63Press q. Decreases the volume.Adjusting the left to right audio balance1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [BALANCE].4) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress w. Increases the volume on the right. L16 - R16Press q. Increases the volume on the left.Setting the audio output of the built-in speaker1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [BUILT-IN SP].4) Press qw to switch the item.f The items will switch each time you press the button.[ON] Outputs the audio from the built-in speaker.[OFF] Does not output the audio from the built-in speaker.Notef When [BUILT-IN SP] is set to [ON], audio is output from the built-in speaker even when a cable is connected to the OUT> terminal. To not output audio from the built-in speaker and output the audio from the external audio device connected to the terminal, set [BUILT-IN SP] to [OFF].Setting audio output in the standby mode1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [IN STANDBY MODE].
