Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 99[DISPLAY OPTION] menuOn the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub‑menu.Refer to “Navigating through the menu” (x page 79) for the operation of the menu screen.[COLOR ADJUSTMENT]Correct the color difference between projectors when using multiple projectors simultaneously.1) Press as to select [COLOR ADJUSTMENT].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Does not perform the color adjustment.[3COLORS] Adjusts the three colors [RED], [GREEN], or [BLUE] and the white [GAIN].[7COLORS] Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].3) Select [3COLORS] or [7COLORS], and press the button.f The [3COLORS] or [7COLORS] screen is displayed.4) Press as to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],[MAGENTA], [YELLOW], or [WHITE] when [7COLORS] is selected).5) Press the button.f The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE], or [3COLORS:WHITE] screen isdisplayed.When [7COLORS] is selected, the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE],[7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW], or [7COLORS:WHITE] screen isdisplayed.f By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.6) Press as to select [RED], [GREEN], or [BLUE].f Only [GAIN] can be adjusted when [WHITE] is selected for [3COLORS].7) Press qw to adjust.f The adjustment value will change between 0 *1 and 2 048.*1 The lower limit varies depending on the color to be adjusted.Notef Operation when correcting the adjustment colorWhen the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.When correction color red is changed: Red is added to or subtracted from the adjustment color.When correction color green is changed: Green is added to or subtracted from the adjustment color.When correction color blue is changed: Blue is added to or subtracted from the adjustment color.f Since advanced skills are necessary for the adjustment, this adjustment should be carried out by a person who is familiar with the projectoror by a service person.f Set [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.f Pressing the button on the remote control will restore the factory default settings for all items.f When [COLOR ADJUSTMENT] is set to anything other than [OFF], the [DISPLAY OPTION] menu → [COLOR CORRECTION] is fixed to[OFF], and the [PICTURE] menu → [COLOR TEMPERATURE] is fixed to [USER].[COLOR CORRECTION]Colors can be adjusted and registered for each input signal format.1) Press as to select [COLOR CORRECTION].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Standard setting[USER]For each of the four signal formats of VIDEO, RGB, and YCBCR /YPB PR , six colors of red, green, blue,cyan, magenta, and yellow can be adjusted and registered. Press the button and set thedetails. Adjustment is possible within the range of -31 to +31.
