Panasonic PT-MZ670 Operating Instructions Manual

Also see for PT-MW530: Operating instructions Operating instructions Operating instructions

Contents

Panasonic PT-MZ670 Operating Instructions Manual Manual pdf 135 page image

Chapter 4 Settings — [SECURITY] menuENGLISH - 135[SECURITY] menuOn the menu screen, select [SECURITY] from the main menu, and select an item from the sub‑menu.Refer to “Navigating through the menu” (x page 79) for the operation of the menu screen.f When the projector is used for the first timeInitial password: Press awsqawsq in order, and press the button.Attentionf When you select the [SECURITY] menu and press the button, entering a password is prompted. Enter the preset password andthen continue operations of the [SECURITY] menu.f When the password has been changed previously, enter the changed password, and press the button.Notef The entered password is displayed with * marks on the screen.f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.[SECURITY PASSWORD]Display the [SECURITY PASSWORD] screen when the power is turned on with the

switch setto the side. When the entered password is incorrect, the operation will be restricted to the power <v/b>button.1) Press as to select [SECURITY PASSWORD].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the security password entry.[ON] Enables the security password entry.Notef This item is set to [OFF] in the factory default setting or when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] isexecuted. Set it to [ON] as necessary.f Change the password periodically that is hard to guess.f The security password is enabled after setting the item to [ON] and setting the

switch to .[SECURITY PASSWORD CHANGE]Change the security password.1) Press as to select [SECURITY PASSWORD CHANGE].2) Press the button.f The [SECURITY PASSWORD CHANGE] screen is displayed.3) Press asqw and the number (<0> - <9>) buttons to set the password.f Up to eight button operations can be set.4) Press the button.5) Re-enter the password for the confirmation.6) Press the button.Notef The entered password is displayed with * marks on the screen.f When numerical values are used for the security password, the security password is required to be initialized if the remote control is lost.Consult your dealer for the method of initialization.[DISPLAY SETTING]Overlap the security message (text or image) over the projecting image.1) Press as to select [DISPLAY SETTING].