Chapter 4 Settings — [NETWORK/USB] menuENGLISH - 139[NETWORK/USB] menuOn the menu screen, select [NETWORK/USB] from the main menu, and select an item from the sub‑menu.Refer to “Navigating through the menu” (x page 79) for the operation of the menu screen.f To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module(Model No.: ET-WM300).For details on how to attach the optional Wireless Module (Model No.: ET-WM300), refer to “Attaching theWireless Module” (x page 50).[DIGITAL LINK MODE]Switch the communication method of the terminal of the projector.1) Press as to select [DIGITAL LINK MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Switches the communication method automatically to DIGITAL LINK, long reach, or Ethernet.[DIGITAL LINK] Fixes the communication method to DIGITAL LINK.[LONG REACH] Fixes the communication method to long reach.[ETHERNET] Fixes the communication method to Ethernet.Possible communication modesl: Communication possible―: Communication not possibleSettingCommunication possibleVideo transfer(100 m (328'1"))Video transfer(150 m (492'2")) Ethernet RS-232C[AUTO]For DIGITAL LINK l ― l lFor long reach ― l l lFor Ethernet ― ― l*1 ―[DIGITAL LINK] l ― l l[LONG REACH] ― l l l[ETHERNET] ― ― l*1 ―*1 Communication via a twisted-pair-cable transmitter is not available. Connect the projector to the network directly.Notef The maximum transmission distance when connected with the long-reach communication method is 150 m (492'2"). In this case, the signalthat the projector can receive is only up to 1080/60p (1 920 x 1 080 dots, dot clock frequency 148.5 MHz).f When the communication method of the twisted-pair-cable transmitter is set to long reach, the projector will connect with long-reachcommunication method when [DIGITAL LINK MODE] is set to [AUTO]. To connect with the optional DIGITAL LINK Switcher (Model No.:ET-YFB200G) with the long-reach communication method, set [DIGITAL LINK MODE] to [LONG REACH].f Connection will not be made correctly if the twisted-pair-cable transmitter is not supporting the long-reach communication method even if[DIGITAL LINK MODE] is set to [LONG REACH].[DIGITAL LINK STATUS]Display the DIGITAL LINK connection environment.1) Press as to select [DIGITAL LINK STATUS].2) Press the button.f The [DIGITAL LINK STATUS] screen is displayed.[LINK STATUS] One of [NO LINK], [DIGITAL LINK], [LONG REACH], or [ETHERNET] is displayed.[HDCP STATUS] One of [NO SIGNAL], [OFF], or [ON] is displayed.
