|
Chapter 1 Preparation — About your projector28 - ENGLISHAbout your projectorRemote control126578916191718101143135121415242521202223Front TopBottom1 Power <v/b> button(v: Standby, b: Power on)Sets the projector to the state where the projector is turnedoff (standby mode) when the switch on theprojector is set to and in projection mode.Sets the projector to projection mode when the power isswitched off (standby mode).2 Remote control indicatorBlinks if any button in the remote control is pressed.3 Lens buttons (, , )Adjusts the focus, zoom, and lens shift of the lens.(x page 67)4 asqw buttonsUsed to navigate through the menu screen. (x page 79)asqw buttons are also used to enter the password in[SECURITY] or enter characters.5 - > button/ buttonAdjusts the volume of the built-in speaker and the audio output.(x page 72)6 buttonResets the content of the displayed sub-menu to the factorydefault. (x page 80)7 Input selection buttons (, , LINK>, , Switches the input signal to project. (x page 66)8 Number (<0> - <9>) buttonsUsed for entering an ID number or a password in a multipleprojector environment.9 buttonSwitches the on-screen display function on (display) or off(hide). (x page 72)10 buttonUsed to simultaneously control all the projectors with asingle remote control in a multiple projector environment.(x page 33)11 buttonDisplays the setting screen relating to ECO management. (xpages 76, 113)12 buttonAutomatically adjusts the image display position while projectingthe image.[PROGRESS] is displayed while in automatic adjustment.(x page 73)Also used for cancel operation during digital zoom and theoperation of the Memory Viewer screen, or while the standbyscreen for Panasonic APPLICATION input is displayed.During MIRRORING input, the receiving device name and theURL to access the projector are displayed at the top left of thescreen. (x page 183)13 buttonAssigns a frequently used operation as a shortcut button.(x page 75)14 buttonDisplays the test pattern. (x page 75)15 buttonSets the ID number of the remote control in a multiple projectorenvironment. (x page 33)16 buttonUsed to correct the distortion of the projected image. (x pages73, 92)17 buttonUsed when pausing the image and turning off the audio.(x page 72)18 buttonOperates the presentation timer function. (x page 75)19 buttonDisplays the projector information.20 button/- > buttonEnlarges or reduces the image. (x page 74)21 buttonUsed when temporarily turning off the image and audio.(x page 71)22 buttonUsed when temporarily turning off the audio. (x page 71)23 buttonSwitches the aspect ratio of the image. (x page 75)24 Remote control signal transmitter
|
