Chapter 4 Settings — [PICTURE] menu84 - ENGLISH[PICTURE] menuOn the menu screen, select [PICTURE] from the main menu, and select an item from the sub‑menu.Refer to “Navigating through the menu” (x page 79) for the operation of the menu screen.[PICTURE MODE]You can switch to the desired picture mode suitable for the image source and the environment in which theprojector is used.1) Press as to select [PICTURE MODE].2) Press qw or the button.f The [PICTURE MODE] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[STANDARD] The image becomes suitable for moving images in general.[DYNAMIC] The image becomes suitable for use in bright areas.[DICOM SIM.] The image becomes similar to that of DICOM Part 14 Grayscale Standard.[BLACKBOARD] The image becomes appropriate to project on a blackboard.[WHITE BOARD] The image becomes appropriate to project on a whiteboard.[CINEMA] *1 The image becomes suitable for movie contents.[NATURAL] *2 The image becomes appropriate to use in a dark room.*1 When movie signal is input*2 When still image signal is inputNotef DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although theDICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.[CONTRAST]You can adjust the contrast of the colors.1) Press as to select [CONTRAST].2) Press qw or the button.f The [CONTRAST] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress w. The screen becomes brighter. -31 - +31Press q. The screen becomes darker.Attentionf When it is necessary to adjust [CONTRAST] and [BRIGHTNESS], adjust the [PICTURE] menu → [BRIGHTNESS] first.[BRIGHTNESS]You can adjust the dark (black) part of the projected image.1) Press as to select [BRIGHTNESS].2) Press qw or the button.f The [BRIGHTNESS] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress w. Increases the brightness of the dark (black) parts of the screen. -31 - +31Press q. Reduces the brightness of the dark (black) parts of the screen.
