Panasonic PT-MZ670 Operating Instructions Manual

Also see for PT-MW530: Operating instructions Operating instructions Operating instructions

Contents

Panasonic PT-MZ670 Operating Instructions Manual Manual pdf 124 page image

Chapter 4 Settings — [PROJECTOR SETUP] menu124 - ENGLISH[AUDIO IN 1] Audio connected to the

terminal.[AUDIO IN 2] Audio connected to the

terminal.[AUDIO IN 3] Audio connected to the

terminal.[HDMI1 AUDIO IN] *1 Audio input to HDMI1 is output.[HDMI2 AUDIO IN] *2 Audio input to HDMI2 is output.[DIGITAL LINK AUDIO IN]*3 Audio input to DIGITAL LINK is output.[NETWORK/USB AUDIO IN]*4 Outputs the audio of MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION.*1 Only when the input signal is HDMI1*2 Only when the input signal is HDMI2*3 Only when the input signal is DIGITAL LINK*4 Only when the input signal is MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION[FILTER COUNTER]Check the runtime of the filter and set the cleaning/replacement cycle of the filter. Also, the runtime of the filter canbe reset.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.[FILTER COUNTER] Displays the runtime of the filter.[TIMER] Sets the cleaning/replacement cycle of the filter.[FILTER COUNTER RESET] Resets the runtime of the filter.Setting [TIMER]If the filter is to be cleaned/replaced periodically, set the cycle in hours. Once the runtime of the filter reachesthe set time, a message prompting to clean/replace the filter [FILTER COUNTER has reached the set time.] isdisplayed on the projected image.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.3) Press as to select [TIMER].4) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Select this item when a message is not to be displayed.[1000 H] - [20000 H] Select this item when a message is to be displayed. The cleaning/replacement cycle of the filter canbe set in 1 000 hour intervals.Resetting [FILTER COUNTER]Reset the runtime of the filter.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.3) Press as to select [FILTER COUNTER RESET].4) Press the button.5) The confirmation screen is displayed, so pressqw to select [OK], and press the button.f Display of [FILTER COUNTER] will change to [0 H].