Chapter 4 Settings — [DISPLAY OPTION] menu108 - ENGLISH2) Press qw to switch the item.f The items will switch each time you press the button.[ON] Enables the signal search function.[OFF] Disables the signal search function.Notef The signal search function does not operate when the input is Panasonic APPLICATION or MIRRORING.f If the input is MEMORY VIEWER, this function will determine that there is an input signal when the USB memory is inserted in the terminal.[BACK COLOR]Set the display of the projected screen when there is no signal input.1) Press as to select [BACK COLOR].2) Press qw to switch the item.f The items will switch each time you press the button.[BLUE] Displays the entire projection area in blue.[BLACK] Displays the entire projection area in black.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.Notef To create and register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Panasonicwebsite (https://panasonic.net/cns/projector/).[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.[NONE] Disables the startup logo display.Notef When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.f To create and register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Panasonicwebsite (https://panasonic.net/cns/projector/).f If the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [QUICK STARTUP] is set to [ON], the startup logo is not displayed whenprojection starts before the specified time elapses after the projector enters the standby mode.The specified time is a time set in the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [QUICK STARTUP] → [VALID PERIOD].[SHUTTER SETTING]Set the operation of the shutter function.Setting [FADE-IN] or [FADE-OUT]1) Press as to select [SHUTTER SETTING].2) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [FADE-IN] or [FADE-OUT].4) Press qw to switch the item.
