Chapter 4 Settings — [SECURITY] menu136 - ENGLISH2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Hides the security message.[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].[USER LOGO] Displays the image registered by the user.Notef To create and register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Panasonicwebsite (https://panasonic.net/cns/projector/).[TEXT CHANGE]Edit the text to be displayed when [TEXT] is selected in [DISPLAY SETTING].1) Press as to select [TEXT CHANGE].2) Press the button.f The [TEXT CHANGE] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.4) Press asqw to select [OK], and press the button.f The text is changed.[MENU LOCK]Press the 1) Press as to select [MENU LOCK].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Enables the menu operation.[ON] Disables the menu operation.Notef This function is set to [OFF] as the factory default setting or after the [PROJECTOR SETUP] menu → [INITIALIZE] is executed. Set it to[ON] as necessary.f When [MENU LOCK] is set to [ON], the [MENU LOCK PASSWORD] screen is displayed by pressing the is enabled by entering the set menu lock password. In this case, enabling of the menu operation is maintained until the projector goes intothe standby mode.[MENU LOCK PASSWORD]Change the menu lock password.1) Press as to select [MENU LOCK PASSWORD].2) Press the button.f The [MENU LOCK PASSWORD] screen is displayed.3) Press asqw to select the character, and press the button to enter the character.f Up to 16 characters can be entered.4) Press asqw to select [OK], and press the button.f To cancel, select [CANCEL].Attentionf The initial password is AAAA as the factory default or after the [PROJECTOR SETUP] menu → [INITIALIZE] is executed.f Change the password periodically and make it hard to guess.
