Chapter 2 Getting Started — Connecting52 - ENGLISH terminal/ terminal pin assignments and signal namesOutside view Pin No. Signal name Pin No. Signal nameEven-numbered pins of (2) to (18)(1) (19)(2) (18)Odd-numbered pins of (1) to (19)(1) T.M.D.S data 2+ (11) T.M.D.S clock shield(2) T.M.D.S data 2 shield (12) T.M.D.S clock-(3) T.M.D.S data 2- (13) CEC(4) T.M.D.S data 1+ (14) ―(5) T.M.D.S data 1 shield (15) SCL(6) T.M.D.S data 1- (16) SDA(7) T.M.D.S data 0+ (17) DDC/CECGND(8) T.M.D.S data 0 shield (18) +5 V(9) T.M.D.S data 0- (19) Hot plug detection(10) T.M.D.S clock+Connecting example: AV equipmentAudio deviceVCR(with built-in TBC)Blu-ray disc playerAttentionf Be sure to use one of the following when connecting a VCR.g Use a VCR with built-in time base corrector (TBC).g Use a time base corrector (TBC) between the projector and the VCR.f The image may be disrupted when nonstandard burst signal is connected. In such a case, connect the time base corrector (TBC) betweenthe projector and the external devices.Notef For the HDMI cable, use an HDMI High Speed cable that conforms to the HDMI standards. If a cable that does not conform to the HDMIstandards is used, images may be interrupted or may not be projected.f The / terminals can be connected to an external device with the DVI-D terminal by using an HDMI/DVI conversioncable. However, this may not function properly for some external devices, and image may not be projected.f The projector does not support VIERA Link (HDMI).
