Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 303 (Page 1 of 1)MMC: 303 ASSIGN BOSS/SECRETARYFOR: ALL SYSTEMSPurpose: Assigns BOSS stations to SECRETARY stations. One BOSS station canhave up to four SECRETARY stations, and one SECRETARY station can have up tofour BOSS stations.* A dedicated BOSS key must be programmed on the SECRETARYkeyset(s). A dedicated BOSS key must also be programmed on the BOSS keyset(s).* For 408/408i systems, a BOSS station can have up to two SECRETARY stations, and viceversa.The “F” key is used to toggle the BOSS/SECRETARY field. (See key layouts in Part 1,section 1.5.2.)ACTION DISPLAY1. Open programming and select 303Display shows(If you want to set up the boss stations for aselected secretary station, press the F key tochange the display to SECR STN. The followingexample describes setting up secretary stations fora selected boss station, but the procedure is thesame for both.)BOSS STN:NONESECR 1:NONE2. Dial BOSS station number (e.g., 205)ORPress VOLUME keys to select station and pressRIGHT soft keyBOSS STN :205SECR 1:NONE3. Dial SECRETARY station number (e.g., 201)ORPress VOLUME keys to select stationPress RIGHT soft key to return to step 3 to entermore SECR numbersBOSS STN:205SECR 1:201BOSS STN:205SECR 2:2024. Press LEFT soft key to return to step 2 andcontinue entriesORPress Transfer/TRSF to store and exitORPress SPEAKER to store and advance to nextMMCDefault Data: NONERelated Items: MMC 722 Station Key Programming