Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 419 (Page 2 of 3)• BRI CODINGA-LAW or μ-LAW (A-LAW in UK)• CLIP TABLEUsed to select the CLIP number to send to the network. If NONE is selected, thetrunk number set in MMC 405 (Trunk Number) is sent to the network. Otherwise, thenumber entered in MMC 323 (Send CLIP Number) corresponding to the number sethere is sent to the network.• NB TYPEChanges the number type field of the set-up message for the CLIP number sent tothe network. Options are UNKNOWN and INT NAT (International).Ports Programmed as "STATION" in MMC 423Display shows "BRI-STN". Items to select include some or all of the following: CHANNELANY, POWER FEED and BRI CODING.• CHANNEL ANY(See above.)• POWER FEEDThis field determines if power to a BRI access will be supplied (YES or NO).• BRI CODINGA-LAW or μ-LAW (A-LAW in UK)In BRI-STN, options DLSEND and BRI MODE are not included because the system usesimplicit data for these: enblock for DLSEND and P-MP for BRI MODE.ACTION DISPLAY1. Open programming and select 419Display shows [701] BRI-TRKCHANNEL ANY : YESOR[701] BRI-STNCHANNEL ANY : YES2. Dial BRI trunk number (e.g. 703)ORPress VOLUME keys to select the portFor TRUNK ports (TRK), go to step 3.aFor STATION ports (STN), go to step 3.b3.a Display is as shown for TRUNK portsUse the RIGHT soft key to position the cursor un-der CHANNEL ANY[703] BRI-TRKCHANNEL ANY : YES