Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 701 (Page 1 of 9)MMC: 701 ASSIGN COS CONTENTSFOR: ALL SYSTEMSPurpose: Creates a new class of service (COS).Note:1. If you want to make a copy of an existing COS and change some options, use MMC 700.2. If the ‘unsupervised conference’ feature is to be allowed in a COS, a CONF key must be pro-grammed on keysets to allow users to re-enter a conference call.TOLL LEVEL OPTIONSDIAL DIGIT TOLL LEVEL0 A1 B2 C3 D4 E5 F6 G7 H(Note: The programming procedure and COS feature lists for iDCS and OS500 systemscome after the programming procedure and COS feature lists for all other systems,shown next.)For all systems except iDCS & OS500ACTION DISPLAY1. Open programming and select 701Display shows COS CONTENTS(01)TOLL LEVEL:A2. Dial COS number (e.g., 06)ORPress VOLUME keys to select COS and pressRIGHT soft key to move cursorCOS CONTENTS(06)TOLL LEVEL:A3. Dial toll level (e.g. 2)ORPress VOLUME keys to select optionCOS CONTENTS(06)TOLL LEVEL:C4. Press RIGHT soft key to advance to COS optionsUse tables and data below to set optionsCOS CONTENTS(06)000:AA CALER:YES5. Press Transfer/TRSF to store and exitORPress SPEAKER to store and advance to nextMMC