Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 854 (Page 1 of 1)MMC: 854 DIAGNOSTIC TIMEFOR: iDCS100 iDCS500 OS500 (iDCS systems must have a LAN interface installed.)Purpose: Sets the Diagnostic Time. The system diagnostics tests include memory au-dits, internal loop-back tests on digital trunks, and DSP and AA DSP tests. Additionaltests include CODEC tests on analogue trunk and station cards and tone tests. If the di-agnostics cannot complete the tests because of system traffic, the system will abort thetest and retry during the next programmed diagnostic time. It is recommended that youassign the diagnostic time during non-peak traffic periods.DIAL PAD DAY SELECTION0= Sunday 4 = Thursday1= Monday 5 = Friday2 = Tuesday 6 = Saturday3 = WednesdayACTION DISPLAY1. Open programming and select 854Display shows DIAGNOSTIC TIMESUN: :2. Dial day selection 0–6 (e.g. MON)ORPress VOLUME keys to select day and pressRIGHT soft keyDIAGNOSTIC TIMEMON: _ :3. Enter hour in 24-hour clock format (e.g. 23 is11pm) DIAGNOSTIC TIMEMON: 23 :_4. Enter minutes in 24-hour clock format (e.g. 30)(In this example, testing will start at 11.30pm onMonday)System returns to step 2DIAGNOSTIC TIMEMON: 23 :305. Press Transfer/TRSF to store and exitORPress SPEAKER to store and advance to nextMMCDefault Data: NoneRelated Items: MMC 852 Assign System Alarms