Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 306 (Page 1 of 1)MMC: 306 HOT LINEFOR: ALL SYSTEMSPurpose: Allows a station to make an automatic internal or external call to a predeter-mined number when the handset is lifted, on the expiration of a timer*. The number canbe a maximum of 18 digits including pauses, flash etc., in the dial string (the access codefor a trunk is not counted).* See MMC 502 Station-Wide Timers: ‘OFFHK SEL’ option (for iDCS or OS500 systems) or see MMC 501,System-Wide Timers: ‘Off-Hook Select Timer’ option (for other systems).The following keys can also be used:“B” Used to insert a flash code “F””C” Used to insert a pause code “P””D” Used to insert a pulse/tone conversion code “C””E” Used to mask/unmask following digits (shows as “[” or “]”)(Refer to section 1.5.2 in Part 1 for key descriptions.)ACTION DISPLAY1. Open programming and select 306Display showsPress RIGHT soft key to advance cursor[201] HOT LINENONE2. Enter station number (e.g. 201)ORPress VOLUME keys to make selection and pressRIGHT soft key[201] HOT LINENONE3. Enter station number to automatically dial via keypad(e.g. 202)—or press VOLUME keys to selectOR[201] HOT LINE202Enter a trunk to automatically dial (e.g. 701)—orpress VOLUME keys to select—then press theRIGHT soft key and enter a maximum of 18 digits todial.[201] HOT LINE701-01235987654_4. Press RIGHT soft key to return to step 25. Press Transfer/TRSF to store and exitORPress SPEAKER to store and advance to nextMMCDefault Data: NONERelated Items: MMC 501 System-Wide TimersMMC 502 Station-Wide Timers