Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 800 (Page 1 of 2)MMC: 800 ENABLE TECHNICIANPROGRAMFOR: ALL SYSTEMSPurpose: Opens and closes system-level (technician) programming. If programming isnot opened and an attempt is made to access a system MMC, the error message “AC-CESS DENIED” will be displayed.A 4-digit passcode is required to access this MMC (which can be changed in MMC 801).When opened, this MMC enables access to all MMCs.The procedure below describes how to open programming.ACTION DISPLAY1. Press Transfer/TRSF 800Display shows ENABLE TECH.PROGPASSCODE:2. Enter passcodeDCS, iDCS500 & OS500 only – Correct codeshows (to allow you to select a tenant)OROther systems – Correct code showsIf you enter an incorrect code, you see this displayand you return to the passcode entry display soyou can try againENABLE TECH.PROGPASSCODE: ∗∗∗∗ENABLE TECH.PROGDISABLE TENANT:1ORENABLE TECH.PROGDISABLEENABLE TECH.PROGPASSCODE ERROR3. Enter 1 to enable or 0 to disableORPress VOLUME keys to selectDCS, iDCS500 & OS500 only - Press RIGHT softkey to move to TENANT field and enter number(1–2)ENABLE TECH.PROGENABLE TENANT:1ORENABLE TECH.PROGENABLEENABLE TECH.PROGENABLE TENANT:24. Press SPEAKER to advance to MMC entry level 801:TEC.PASSCODESELECT PROG.ID