Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 605 (Page 1 of 1)MMC: 605 ASSIGN EXTERNALPAGE ZONEFOR: ALL SYSTEMSPurpose: Determines which relays will close when one of the external page zones 5 to 8is accessed. (816 and 408/408i systems have only one external page zone—see below.)DCS System must be equipped with a Trunk A card to allow external paging. EachTrunk A card is equipped with two external page relays. The page relays havedefault DNs of 360X (e.g. 3601)CII One external page zone is located on the base board. Three are located onthe optional MISC card. The page relays have default DNs of 36x (e.g. 361)816/408/408i One external page zone (zone 5) is located on the base board. The page re-lay has a default DN of 361. The optional port is 362 (see MMC 219).iDCS100 One external page zone is located on the base board. Three are located onthe optional MISC card. The page relays have default DNs of 36x (e.g. 361)iDCS500 System must be equipped with a MISC card for external pagingOS500 System must be equipped with a MISC card for external pagingACTION DISPLAY1. Open programming and select 605Display shows first page zone (member numbershows as 1 or 01 etc, depending on system)EXT. PAGE ZONE:(5)MEMBER 1 :NONE2. Dial page zone number (e.g., 6)ORPress VOLUME keys to select desired page zonenumber and press RIGHT soft key to move cursorEXT. PAGE ZONE:(6)MEMBER 1 :NONE3. Dial member number (e.g., 3 or 03)ORPress VOLUME keys to select member numberand press RIGHT soft key to move cursorORPress LEFT soft key to return to step 2EXT. PAGE ZONE:(6)MEMBER 3 :NONE4. Dial relay number (e.g., 362 or 3602) and pressRIGHT soft key to return to step 2ORPress LEFT soft key to return to step 3EXT. PAGE ZONE:(6)MEMBER 3:3625. Press Transfer/TRSF to store and exitORPress SPEAKER to store and advance to next MMCDefault Data: NoneRelated Items: MMC 219 Common Relay Service Type