Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 501 (Page 6 of 6)PAGE TIME OUT: Controls the duration of a page announcement.PAGE TONE: Controls the duration of tone burst heard over the page prior to the page announce-ment.PARK RECALL: Controls the period of time a call is parked before recalling to the call park originator.PC-MMC LOCK: Monitors PCMMC activity, drops the link if no action is created by PCMMC and re-turns the system to secure program status.PERI UCD REPORT: Controls the interval between periodic UCD reports being output to the applica-ble port.POWER DOWN: Sets the duration of disconnect signal for VM/AA ports.RECALL DISCONNECT: The time an attendant recall rings before being disconnected. See ATT Re-call timer.RECALL WAIT: This is the time any recall (hold or transfer) continues to recall at your station beforeit recalls to the operator.SMDR START/DP (DIAL PULSE (ROTARY)): This grace period timer starts SMDR recording for ro-tary dialling. This timer also controls the LCD duration timer on the keysets. The duration time dis-played and the SMDR time duration will be the same.SMDR START/DTMF: This grace period timer starts SMDR recording for touchtone dialling. Thistimer also controls the LCD duration timer on the keysets. The duration time displayed and the SMDRtime duration will be the same.ROUTE OPTIMISE: When a call is made via Q-SIG signalling, route optimisation is activated after thistime.SYS HOLD RECALL: Determines the time calls can be left on hold before recalling the holding sta-tion. Setting timer to 000 means no recalling will take place.TRANSFER RECALL: Determines the time that transferred calls ring before recalling. See RecallWait timer.TSW CONN. DELAY : On external call forward or tandem working, the time before the forward desti-nation is connected to the external call. If this timer is very short, the caller hears ringback tone, dialtone and ringback tone again.UCDS AUDIO ALARM: Determines how long the longest waiting call can be held before the systemgives an audio alarm to the UCD supervisor.UCDS VISUAL ALARM: Determines how long the longest waiting call can be held before the systemgives a visual alarm to the UCD supervisor.VMS UCD MSG: Not used in UK/EU.VOICE DIAL DELAY: Monitors the duration of the interaction between the main software and theVoice Dialler card. If there is no response from the card within this time, the system decides that voicedialling has failed (iDCS500 and OS500 systems only).VOIP RE-ROUTE: Time allowed for the system to wait for a response to a setup message over theVoIP network before it goes to the next route.