Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 104 (Page 1 of 1)MMC: 104 STATION NAMEFOR: ALL SYSTEMSPurpose: Enters a name, up to 11 characters, to identify an individual keyset. The namewill display in the keyset’s LCD.Names are written using the keypad. Each key press moves the cursor and enters theselected character.* For example, if the name is “SAM SMITH”, press the number “7”four times to get the letter “S”. Now press the number “2” once to get the letter “A” Con-tinue selecting characters from the keypad to complete your name. Press the program-mable “A” key to toggle between upper and lower case text. (Refer to section 1.5.2 inPart 1 for key descriptions).* Tip: When the character you want is on the same key as the previous character you typed in,press the VOLUME UP key to move the cursor to the right, then select the character.The # key can be used for the following special characters (in sequence of key presses):# space & ! : ? . , % $ - < > / =[ ] @ ^ ( ) _ + { } | ; " → `ACTION DISPLAY1. Open programming and select 104Display shows[201] STN NAME2. Dial station number (e.g., 205)OR[205] STN NAME_Press VOLUME keys to select station and pressRIGHT soft key to move cursor3. Enter the station name using the proceduredescribed above and press RIGHT soft key to[205] STN NAMESAM SMITH_return to step 24. Press Transfer/TRSF to store and exitORPress SPEAKER to store and advance to next MMCDefault Data: NoneRelated Items: None