Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 815 (Page 1 of 2)MMC: 815 CUSTOMER DATABASE COPYFOR: iDCS100 iDCS500 OS500Purpose: Enables the onboard customer database (SRAM) to be copied to the Smart-Media card database (SMDB)—or the iDCS100 Flash Memory database (FLDB)—andalso allows a saved SMDB or FLDB database to be copied to the SRAM.A daily save can be programmed to automatically save the SRAM to the SMDB or FLDB.This ensures that an up to date database is always available in case of a system failure.A daily save time of 00:00 means this option is disabled. It is recommended that youCLEAR the SMDB or FLDB before the SRAM is copied to it. When the SRAM is copiedto the SMDB or FLDB there is no interruption in service. If the SMDB or FLDB is copiedto the SRAM the system will reset to accept the new data.Note:1 iDCS100 systems require a MEM4 card which contains the SRAM.2 The SRAM is on the MCP/MCP2 card in iDCS500 and OS500 systems.If the SmartMedia card or Flash Memory is in use when you run this program, a message“SMART IS BUSY” or “FLASH IS BUSY” is displayed.ACTION DISPLAYTo copy SRAM to SMBD or FLBD1. Open programming and select 815 CUST.DBASE: SMDBS:10/18/02 01:00Display is date (MM/DD/YY) and time (HH:MM) oflast save ORCUST.DBASE: FLBDS:10/18/02 01:002. Press RIGHT soft key and then press VOLUMEkeys to select CLEAR optionPress RIGHT soft keyCUST.DBASE: SMBDCLEAR SMBD :NO3. Press VOLUME keys to select YES (or NO) andpress RIGHT soft key CUST.DBASE: SMBDCLEAR SMBD :YES4. Press VOLUME keys to select YES (or NO) andpress RIGHT soft keySelecting YES will clear the databaseCUST.DBASE: SMBDARE YOU SURE? :YES5. Press VOLUME keys to select SRAM optionand press RIGHT soft key CUST.DBASE: SRAMDAILY SAVE: 01:006. Enter Daily Save time e. g. 0200 CUST.DBASE: SRAMDAILY SAVE: 02:00