SAMSUNG MMC PROGRAMCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 210 (Page 2 of 5)SYSTEMFEATURE DESCRIPTIONDCS / CII 816 408/408i iDCS OS500DISA PSWD Determines whether outside customers are required to enter DISA pass-code (Yes=ON, No=OFF). LCR ENABLE Enables LCR feature in the system. SMDI VMS SET Allows SMDI integration through RS-232 port for the external PC-basedVoice Mail system. PERI UCD RPT(iDCS only)orPERI UCD SET(other systems)Periodic UCD information provider. Enables UCD statistics data on a perUCD group basis to print out on the I/O port which has been set as SMDRor UCD REPT in real time (see MMC 501– PERI UCD REPORT timer op-tion). This allows extended manipulation of the information by an externalthird-party-provided software package.(For iDCS & OS500 systems, refer to PERI UCD SIO option, below.) CID CODE INS Allows the digit ‘1’ to be automatically inserted for a toll call. (Not used inUK.) 408i only DISA MOH An additional option that can be presented to outside DISA callers: a vari-able indication provided by an MOH source instead of a fixed DISA dialtone. TRANSFER MOH Callers who have been transferred from an extension or UCD group or AAgroup will hear MOH, until answered by the called extension, instead of ringback tone. DSP SSPDNAME LCD displays programmed name of system speed bin if it has been pro-grammed in MMC 706; otherwise, it shows digits programmed in MMC 705(even if this option is set to ON).[Note: iDCS500 ‘L’ & OS500 systems use DISP SPDNAME option in MMC 110.] iDC500 ‘M’& iDC100onlyDID BSY ROUT DDI calls to a busy extension can be routed to an assigned destination, inMMC 406, before the call is dropped. 408i only DID NOT ROUT DDI calls with no mapping in MMC 714 can be routed to an assigneddestination in MMC 406. 408i only ALARM MOH If the Wake-up Announcement feature (MMC 224) is not programmed butthis option is turned ON, the user will hear the station Music-On-Holdsource as a wake-up alarm. ALL PICK UP Independent pickup group; can pick up all calls.