Samsung DCS Programming Manual

Also see for DCS: User guide Programming manual Quick reference guide User guide Guide

Contents

SAMSUNG MMC PROGRAMSCOMBINED SYSTEMS PROGRAMMING MANUAL FEBRUARY 2004MMC 506 (Page 1 of 2)MMC: 506 TONE CADENCEFOR: ALL SYSTEMSPurpose: Sets and changes tone cadences on a system-wide basis. There are 14 tonesavailable, as listed below. Tones can be set to ‘interrupt’ or ‘continuous’, and interrupttone cadences can be customised. Some systems may require default settings to complywith local operating companies.FEATURE KEYSDIAL 0 INTERRUPT TONEDIAL 1 CONTINUOUS TONETONESBUSY Busy toneCONFM/BARGE Confirm tone and Barge-in toneDIAL Dial toneDND/NO MORE DND tone and No More Call key toneERROR Error toneHOLD/CAMPON Hold tone and Camp-on toneMSGWAT Message waiting toneRGBACK Ringback toneRING Ring over page tone (to external page port)TRSFER Transfer dial toneDID RNGBACK AC15 ringback tone (not available on 408 systems)CO BUSY CO Busy toneCO RINGBACK CO Ringback toneCO DIAL CO Dial toneACTION DISPLAY1. Open programming and select 506Display shows BUSY TONEINTERRUPT TONE2. Press VOLUME keys to select tone (e.g.TRSFER)and press RIGHT soft key TRSFER TONEINTERRUPT TONE3. Dial 0 for INTERRUPT tone or 1 for CONTINUOUStoneORPress VOLUME keys to select and press RIGHTsoft key4. If you selected INTERRUPT tone, dial in newvalue(s) for interrupt times (must be four digits each– sequence is on/off/on/off)Press RIGHT soft key to advance cursorPress LEFT soft key to retreat cursorIf entry is valid, system returns to step 2TRSFER TONE: 01000100 0100 0100