Samsung OfficeServ 7200 User Instructions

Also see for DS 5000 Series: User guide User instruction User guide User manual Quick reference guide

Contents

connected to the CO call. In order for this option to work the station must also beprogrammed for auto answer (see SET ANSWER MODE).• While on hook, press TRANSFER and then dial 110.• Dial 151 to turn Auto Answer CO on or 150 to turn it off.• Press TRANSFER to store your selection.NOTE: Outside lines must ring your station directly for the Auto Answer CO towork. Lines ringing a station group will not cause your phone to Auto Answer.DISPLAY SPEED DIAL NAMEThis option allows you to view the name associated with a speed dial number asit is dialed.• With you handset on-hook, press TRANSFER and then dial 110.• Press 111 to turn DISP SPDNAME on or 110 to turn it off.• Press TRANSFER to store your selection.CALLER ID REVIEW ALLThis feature allows display keyset users to review Caller ID information for callssent to their stations.This list can be from ten to fifty calls in a first in, first out basis.The list includes calls that you answered and calls that rang your station but thatyou did not answer. When reviewing this list, you can press one button to dial theperson back. The system must be using LCR to dial the stored number.• With you handset on-hook, press TRANSFER and then dial 110.• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.• Press TRANSFER to store your selection.SECURE OHVAThis option allows you to receive OHVA calls via the speaker while you are on thehandset.• With you handset on-hook, press TRANSFER and then dial 110.• Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.• Press TRANSFER to store your selection.46CONFIGURE MOBILE EXTENSIONS (MOBEX)This feature allows you to configure options for any Mobile Extension (MOBEX)ports that are assigned to you by your telephone system administrator. You canturn a port on or off; set the telephone number for the port; or set the caller ID youwill be calling in from. The caller ID field has no effect unless you have beenauthorized as an Executive MOBEX user. Check with your telephone systemadministrator for further details on your specific system configuration.To set the phone number a MOBEX port can reach you on:• Press TRANSFER and then dial 126.• Dial your station pass code.• Dial the number of the port you wish to configure (1-5) (you may also use theVolume Up and Volume Down keys to select a port and press the right softkey to confirm).• Dial 0 to select the telephone option.• Dial the number of a C.O. line to use when making calls to this MOBEX port.• Dial the phone number you can be reached at by users calling this MOBEXport.• Press TRANSFER to store your selection and exit programming.To set the caller ID of the location you will be calling in from:• Press TRANSFER and then dial 126.• Dial your station pass code.• Dial the number of the port you wish to configure (1-5) (you may also use theVolume Up and Volume Down keys to select a port and press the right softkey to confirm).• Dial 1 to select the caller ID option.• Dial the phone number you will be calling in from.• Press TRANSFER to store your selection and exit programming.To turn a MOBEX port ON or OFF:• Press TRANSFER and then dial 126.• Dial your station pass code.• Dial the number of the port you wish to configure (1-5) (you may also use theVolume Up and Volume Down keys to select a port and press the right softkey to confirm).• Dial 2 to select the activation status option.• Dial 0 to turn the port on, dial 1 to turn the port off.• Press TRANSFER to store your selection and exit programming. To turn aMOBEX port ON or OFF:• Press TRANSFER and then dial 126.47