2726TRANSFER TO VOICE MAILThis feature is used to send a call directly to a voice mailbox.Your keyset must havea correctly programmed VT button to accomplish this. To transfer a call directly toa voice mailbox:• While on a call, press the VT button and dial the mailbox number.• Hang up when dialing is completed.CALL WAITINGIf an outside call has been camped-on to your phone or another station hascamped-on to you:• You will hear a tone in the earpiece and the call that is waiting for you(camped-on) will flash. In addition the bottom line of the display will indicatethe number of the station or trunk party camped-on.• Press the flashing button to answer; your other call will go on hold automati-cally if your station has the Automatic Hold feature set. If not, you must pressHOLD and then the flashing button—OR—finish the first call and hang up;the waiting call will ring.• Lift the handset or press the SEND button to answer.NOTE: Intercom calls will not go on Automatic Hold.When using the speakerphonethe camp-on tone will come through the speaker.CONFERENCE CALLSYou may conference up to five parties (you and four others) in any combination ofoutside lines and internal stations in any order.• While engaged in a conversation, press the CONFERENCE button and receiveconference tone.• Make another call, either intercom or outside, press the CONFERENCE buttonand receive conference tone.• Make another call or press the CONFERENCE button to join all parties.• Repeat the last step until all parties are added.NOTE: When attempting to add another party to the conference and you are notable to reach the desired person, hang up. Simply press the CONFERENCE buttonagain to return to your previous conversation.To drop a party from your conference call:• Press CONFERENCE and dial the extension or line number that is to bedropped.• Press CONFERENCE again to reestablish the conference.NOTE: To leave the conference, hang up. Control is passed to the next internal sta-tion. If there are no internal stations and you wish to leave outside lines connect-ed together in a trunk to trunk conference, press the CONFERENCE button plusthe CALL button that the call appears on or follow the instructions to drop a partyand use your extension number. When they hang up, the lines will release auto-matically. Press CONFERENCE to rejoin a trunk to trunk conference.CONFERENCE SPLITTINGIf you are the controlling party of a conference and your keyset has the Auto Holdfeature turned on (See Customizing Your Keyset) and all of the outside lines involvedin the conference appear as buttons on your keyset, you can split the conferenceinto separate calls as follows:• Press any one of the outside line buttons. That outside line indicator willremain steady to indicate you are still connected to it. All other outside linesin the conference will be placed on system hold at your keyset. All intercomcallers in the conference will be disconnected. You may now speak with eachcaller privately and transfer them as usual, or reestablish another conference.CONFERENCE GROUPSUsers can create up to six Conference Groups with five members each (includingyourself ). They can then call all members or only selected members of this groupat the same time. As each member answers, their status is indicated in the display.Depending whether the member is either IN the conference or OUT of the confer-ence they can be dropped or called with a single button press. Each ConferenceGroup can be programmed with a name for easy identification.Creating a Conference Group• From the idle condition press the CONFERENCE button.• Press the MENU button, then select ADD option.• The Group Name Window appears. Enter up to a 20 character name using thedial pad keys. Use the navigation key to move the cursor left or right whileentering characters.• Press the DOWN button on the NAVIGATION DISC to move the cursor to thefirst entry “NUM01” and begin entering the phone number of the first mem-ber.• Enter 9 plus the outside telephone number or enter an internal extensionnumber. Repeat the process until all members are entered in the ConferenceGroup. Use CANCEL to erase digits as needed.• Press ENTER to SAVE this conference group.• Press END to return phone to idle condition.