3635SYSTEM MAINTENANCEALARMSThe OfficeServ 100, OfficeServ 500, and OfficeServ 7000 systems provide a featurethat self-checks for any failures. If a failure does occur in the software or hardware,a fault error will be generated and buffered to an alarm report. During an alarmstate every phone with an assigned SYSTEM ALARM button will ring and causethe SYSTEM ALARM button to flash amber. A phone with a display should beused so that the alarm information can be viewed.When an alarm occurs, the usercan press the SYSTEM ALARM button to view and scroll through the alarms. Thiswill silence the audible part of the alarm, but the SYSTEM ALARM button willcontinue to flash until your Service Company views and clears the alarms in thealarm report located in the system software.CUSTOMER SET RELOCATION ALLOW TABLESingleLineDCS*, DS& iDCS 64 AOM iDCS 8B iDCS 18B iDCS 28B ITP-5107S ITP-5121D ITP-5112L DS5021D DS5014D DS5007SSingleLine YES NO NO NO NO NO NO NO NO NO NODCS*, DS& iDCS 64AOMNO YES NO NO NO NO NO NO NO NO NOiDCS 8B NO NO YES NO NO NO NO NO NO NO NOiDCS 18B NO NO NO YES YES NO NO NO NO NO NOiDCS 28B NO NO NO YES YES NO NO NO NO NO NOITP-5107S NO NO NO NO NO YES NO NO NO NO NOITP-5121D NO NO NO NO NO NO YES NO NO NO NOITP-5112L NO NO NO NO NO NO NO YES NO NO NODS5021D NO NO NO NO NO NO NO NO YES NO NODS5014D NO NO NO NO NO NO NO NO NO YES NODS5007S NO NO NO NO NO NO NO NO NO NO YES[DCS Keysets and 32 button AOM not supported on the OS 7100].
