Samsung OfficeServ 7200 User Instructions

Also see for DS 5000 Series: User guide User instruction User guide User manual Quick reference guide

Contents

51SELECT RING TONEEach ITP-5112L user can select from a variety of ring tones.From the LCD:• Press MENU button.• Scroll to SOUND/SCREEN option and press ENTER.• Scroll to RING TONE SELECT and press ENTER—OR—you may dial 1 andimmediately enter the option.• Select from one of the three categories:1. Standard Ring Tones2. Melody or3. My Ring Tones• Press ENTER to select. Use LEFT/RIGHT arrow buttons to scroll through theavailable ring tones and press ENTER to SAVE.• Press CANCEL to return to the Main Option Page—OR—press END to returnto idle screen.CHANGE YOUR PASSCODEFrom the factory, your station passcode is 1234.You can change your station pass-code whenever you desire.• While on-hook, press TRANSFER and then dial 101.• Dial your old passcode.• Dial a new passcode (must be four characters). You can use 0–9.• Redial the new passcode to verify. If successful, you will hear two beeps. Fourbeeps indicate an incorrect code. Reenter the code again.• Press TRANSFER to store the new passcode.From the LCD:• Press MENU button.• Scroll to MY PHONE option and press ENTER.• Scroll to CHANGE PASSWORD and press ENTER—OR—you may dial 3 andimmediately enter the option.• Enter CURRENT PASSWORD, press ENTER.• Enter NEW PASSWORD and press ENTER.• Enter NEW PASSWORD again, for confirmation and press ENTER.• Press CANCEL to return to the Main Option Page—OR—press END to returnto idle screen.CUSTOMIZING YOUR KEYSETAME PASSWORDThis feature allows customers using the AME feature to enable password protec-tion. This will prevent unauthorized users from listening to your messages beingleft.The passcode is the same as your station passcode.This feature only applies ifthere is a Samsung Voicemail card installed in the system and your keyset has aprogrammed AME button.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 101 to turn on AME PASSCODE or 100 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to SETUP option and press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 andimmediately enter the option.• Scroll to AME password and press ENTER to change status.• Press CANCEL to return to the Main Option Page—OR—press END to returnto the idle screen.AUTO CAMP-ONThis option allows intercom calls to be automatically camped on, if possible, whena busy station is called.• With the handset on-hook, press TRANSFER and then dial 110.• Press 081 to turn CAMP-ON on or 080 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to SETUP option and press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 andimmediately enter the option.• Scroll to AUTO CAMP-ON and press ENTER to change status.• Press CANCEL to return to the Main Option Page—OR—press END to returnto the idle screen.50