105Figure 29 Printer Reboot NotificationWhen the Web page is redirected, download process is complete.Automatic Download (.exe)NOTE: This method of download requires firmware in the form of FILENAME.exe. The firmware can bedownloaded without manually putting the printer into download mode.1. Make sure the printer online state and that applicable host IO cables are connected.2. Navigate to the directory where the target firmware is located. If the target firmware is on the CD,insert the printer emulation software CD into your computer’s CD drive.3. The target firmware must be in the format FILENAME.exe where the FILENAME is a six digit numberwith the .exe extension (e.g., 123456.exe).4. For USB connections, the Windows Driver must be installed. Install the Windows Driver on the StarterKit CD before continuing. Alternatively, drivers can be found athttp://www.tallygenicom.com/products/drivers.aspx.During installation, make sure to share the printer when prompted and record the “Share name”(Figure 30).Figure 30 Specifying a Printer Share Name for USB Connection
