156ZTP SETTINGS MenuThe ZTP SETTINGS menu includes the ability to enable and disable features unique to the Zero Tearprinter (ZTP), set the tear bar distance, set the auto present data time, and set the auto present wait time.This section defines these options.ZTP Data TimeThis option sets the pause time in the data stream that the ZTP requires before moving the form to thetear bar once a print job is completed. The values range from .5 to 15 seconds. The default is .5 seconds.ZTP Wait TimeThis option sets the minimum amount of time that the form stays at the tear bar. This allows you time toremove the form before the form is retracted to print the next form. The adjustable values range from 1 to10 seconds in increments of 1 second. The default value is 2 seconds.ZTP TearDistanceThis option sets the tear off distance from the current print position to the tear bar. Adjustable values inincrements of 1/144th of an inch range from 200 to 2880. The left and right arrows adjust the displayvalue. When you press the ENTER key, the selected value is stored and a scale is printed to indicate thecurrent tear off position. The default value is 1060.NOTE: When a new value is selected, the printer will lose the current print position. You must reset thetop of form to automatically save the new value.ZTP Platen OpenThis option allows the user to have the platen open whenever forms are reversed. Enabled is the default,used for most papers and labels. The feature can be disabled as required by some multi-part forms.ZTP FunctionThis option enables or disables all unique ZTP functions. The default is Enable.NOTE: When the ZTP Function is enabled, the VIEW key is disabled and Slow Paper Slew is enabled.ZTPSETTINGS 1*= Factory Default1 Available for Zero Tear Pedestal printers only.ZTPPlaten OpenZTPFunctionEnable*DisableEnable*DisableZTPData Time.5 Sec*1.0 – 15.0 SecZTPTearDistance1060/144 Inch*ZTPWait Time2 Sec*3 – 10 Sec1 Sec
