87• Enhanced. The NIC waits for the printer to finish receiving the current job before sending another job.The status line shows “done” when the job is fully printed.• Fast Standard. The EOJ (End of Job) packet is acknowledged immediately. Use this selection if thejob is timed out due to a delay in the acknowledgement of the EOJ packet because of the amount ofdata being printed.• Off. No job synchronization between the NIC and the printer.Offline Process• Disable (factory default). When set to disable, the printer does not network data while in offline mode.• Enable. When set to enable, the printer continues to process without printing the current network jobwhile the printer is offline until the printer’s buffer is full.Test MenuEnable*DisableTest Menu(from page 48) * = Factory DefaultShuttle OffPaper MotionDiagFaultOverridePatternPanel Lock5 Seconds*1 to 60 SecondsOff*OnConfiguration*IP AddressRibbon LifeShift Recycle*All E’sE’s + TOFAll H’sAll UnderlinesAll BlackShuttle SlowShuttle FastShuttle OnlyPhase PrinterPaperout Adj.Burnin TestPrint Error LogClear Error LogEthernet TestAcousticsDice 5Print Ribbon LogCheckerWeld Patch LogNovram Err LogAll CharactersFull Width*80 col.50*1-200040 dots*(4-76)128 Megabytes On: x.x Hrs.Print: x.x HrsPrint Strokes:xxxxxPrint Lines:xxxxx11 inch Pages:xxxPoweron PagesSystemMemoryPaper OutDotsPhase ValueTest WidthPrinter Tests PrintStatisticsPanel DisplayAuto DumpDisable*Enable
