TallyGenicom LMPPLS Administrator's Manual

Contents

TallyGenicom LMPPLS Administrator's Manual Manual pdf 23 page image

23UP + DOWN ( + )Locks and unlocks the ENTER key.PREV or NEXT ( or )Moves between the options on the current level of configuration menu. In the configuration menu,press  to scroll backward or press  to scroll forward through the menu selections on the same level.PREV + NEXT (  + )When both keys are pressed simultaneously, the printer will reset to the power-up configuration and resetits internal state (in offline mode).Ribbon Life IndicatorIf the Panel Display menu is set to Ribbon Life, the bottom of the LCD displays the remaining life of thecurrently installed ribbon. The default settings for this feature should match the requirements for mostapplications; no special user setup is needed. If your particular application requires darker printing or cantolerate lighter printing, the ribbon end point can be adjusted as appropriate. See Ribbon on page 51.Cancel a Print JobThe procedure to cancel a print job depends on the printer emulation and your application software.Contact your system administrator for additional information.1. If the printer is online, press ONLINE to place the printer in offline mode.2. From the host system, stop the print job.NOTE: If the print job is not stopped from the host system before pressing CANCEL, the print jobcontinues with data missing when the printer returns to online mode. Exercise caution to preventunwanted data loss occurrences, as this function deletes unprinted data in the printer. Thisfunction is active only in offline mode; the purpose of this function is to eliminate the necessity ofprinting unwanted data when print jobs are canceled.3. Press CANCEL.4. Set the top-of-form. Refer to the Quick Reference Guide.Operational ProceduresThis section contains routine printer operating procedures on how to:• reload paper• unload paper.Reload PaperDo this procedure when “LOAD PAPER” displays. (This message occurs when the lastsheet of paper passes through the paper slot.) This procedure reloads paper withoutremoving the last sheet of the old paper supply, while retaining the current top-of-formsetting.