22 TASCAM DP-24SD3 – Names and Functions of Parts& MONITOR LEVEL knobUse this knob to adjust the output level of the outputsignals.* MARK SET buttonDuring recording or playback, press this button to set a markmanually. (See “Location marks” on page 44.)( AUTO PUNCH button/indicatorPress this button to turn the auto punch mode on and off.When auto punch mode is turned on, Auto Punch isdisplayed on the Home screen. (See “Automatic punching inand out” on page 46.)) IN buttonPress this button to locate the IN point.Press and hold the MARK SET button and press this buttonto set the IN point.Press and hold the JUMPBACK (PREVIEW) button andpress this button to perform the pre-roll playback up to thecurrent position and stop. (See “Checking cueing points(preview)” on page 46.)Q REHEARSE button/indicatorUse this button to turn the Rehearse mode on and off. Inaddition to auto punch in/out, you can also use the Rehearsemode for ordinary recording. (See “Rehearsing the recording”on page 39.)W OUT buttonPress this button to locate the OUT point.Press and hold the MARK SET button and press this buttonto set the OUT point.Press and hold the JUMPBACK (PREVIEW) button andpress this button to perform the post-roll playback from thecurrent position, return and stop. (See “Checking cueingpoints (preview)” on page 46.)E REPEAT button/indicatorPress to this button to turn Repeat Playback mode on andoff. (See “Using repeat playback” on page 46.)R JUMPBACK (PREVIEW) buttonPress this button to rewind the specified number of secondsfrom the current position and start playback. (See “Jumpbackplayback” on page 46.)T REC SAFE buttonPress to disable recording on all tracks.Front panelY PHONES jackUse this stereo standard jack to connect stereo headphones.Use the MONITOR LEVEL knob on the top panel to adjustthe volume.CAUTIONBefore connecting headphones, use the MONITOR LEVELknob on the top panel to set to the volume to minimum. Aloud noise could occur, resulting in damages to equipmentand people's hearing.U REMOTE jack (2.5mm dia. TRS jack)Connect the TASCAM RC-3F foot switch (sold separately).This allows you to remotely control a variety of operations,including punch in/out (start and stop recording).