Tascam DP-24SD Owner's Manual

Also see for DP-24SD: Troubleshooting supplement

Contents

Tascam DP-24SD Owner's Manual Manual pdf 23 page image

TASCAM DP-24SD 233 – Names and Functions of PartsRear panelI STANDBY/ON buttonWhen the power is OFF (standby), press and hold this buttonto turn the power on. When power is ON, press and holdthis button to turn the power off (standby). (See “Start-up &Shutdown” on page 27.)O SD card slotInsert the SD card into this slot.P USB portUse a commercially-available USB cable to connect with acomputer USB port. (See “Connecting to a computer” onpage 67.)CAUTIONAlways connect the unit directly to a computer. Do not usea USB hub.A Kensington lock attachment holeS DC IN 12V jackConnect the supplied PS-P1220E AC adapter.D MONITOR OUT jacks (standard balanced TRS jacks)These jacks output the signal selected in the monitor sectionof the top panel. These are standard balanced phone jacks.F EFFECT SENDS jacks (standard unbalanced TS jacks)These jacks output the signal from effect sends 1 and 2.G STEREO OUT jacks (unbalanced RCA jacks)These jacks output the stereo bus signal.H LINE-GUITAR switchYou must set this switch according to the input source of theMIC/LINE INPUTS H. When connecting directly an electricguitar, electric bass or other similar instrument, set thisswitch to GUITAR. When connecting a digital instrument oran audio equipment, set it to LINE.J MIC/LINE INPUTS A-H jacks (balanced)These are balanced analog XLR/TRS combo jacks for micro-phone and line inputs.• XLR (1: GND, 2: HOT, 3: COLD)• TRS (Tip: HOT, Ring: COLD, Sleeve: GND)Home screenHome screen and track level meter display1 Counter mode displayDisplays the currently selected time counter mode: ABS orBAR.2 Recorder time counter displayDisplays the elapsed time from the start of the song.3 REMAIN time displayDisplays the remaining recordable time (Hours : Minutes) ofthe SD card.4 Repeat playbackWhen the unit is in Repeat Playback mode, the iconappears.5 Playback position displayDisplays the current Playback position.6 Recorder mode displayDisplays the current Recorder mode.Multi Track Multi Track modeBounce Bounce modeMixdown Mixdown modeMastering Mastering modeThe following items are also displayed: Rehearsal,Auto Punch and Search.7 INPUT A to H overload indicatorsIf the input signal of any INPUT A to H source is too loud,the corresponding indicators light.