Tascam DP-24SD Owner's Manual

Also see for DP-24SD: Troubleshooting supplement

Contents

Tascam DP-24SD Owner's Manual Manual pdf 26 page image

26 TASCAM DP-24SD4 – PreparationInserting and removing SD cardsInserting an SD cardInsert the SD card into the SD card slot on the rear panel asshown in the illustration until it clicks into place.NOTEAn SD card is installed in the SD card slot when the unit isshipped from the factory. If you want to use this card torecord and play tracks, there is no need to reinstall it.Removing the cardPush the loaded card in gently to eject it.CAUTION• Always turn the power off (standby) before removing an SDcard.If you remove or insert an SD card when the power is on,recorded data may be lost and cannot be recovered.• SD and SDHC cards that are at least 512 MB in size can beused.• A list of SD cards that have been confirmed to work withthis unit can be found on the TEAC Global Site (http://teac-global.com/).About write-protected SD cardsSD cards have write-protect (lock) switches.Unprotected ProtectedWhen the protect switch is in the LOCK position, files cannot berecorded or edited on the card. Slide the switch away from theLOCK position if you want to record, erase or otherwise changefiles on a card.Powering the unitAs shown in the illustration, connect the included PS-P1220E ACadapter to the DC IN 12V jack.AC outletDC plugPS-P1220ECAUTION• Use only the included PS-P1220E AC adapter and powercord. Use of a different AC adapter could cause malfunction,fire or electric shock.• Be sure to use the included PS-P1220E AC adapter to supplypower to this unit. Power cannot be supplied to this unit viaUSB.NOTEThe AC adapter for the unit includes two types of outletplugs. Attach the type of plug that matches the power outletthat you are using.Changing the outlet plug$ %215341 Move the latch on the AC adapter in the direction of thearrow.2 Pull off the outlet plug.3 Replace it with the other outlet plug (A or B).4 Move the latch on the AC adapter in the direction of thearrow again.5 Attach the outlet plug to the AC adapter.This completes changing the outlet plug.After changing the outlet plug, confirm that is notloose or crooked and that everything is normal beforeplugging it into an outletCAUTIONDo not use the adapter if there is anything abnormal aboutthe plug after changing it. Use when the plug is abnormalcould cause fire or electric shock. Contact the store whereyou purchased this unit or a TASCAM customer supportservice to request repair.