52 TASCAM DP-24SD8 - Track EditingSILENCE (Erase Part)This function cuts (deletes) the audio data between the IN andOUT points on the selected track.This is the same as leaving silence between the IN and OUTpoints, as though there had been no recording.This operation does not change the length of the track.The following parameters are used in this operation.• TARGET Track (1 to 12, 13/14 to 23/24, ALL)• IN/OUTTIPYou can use this function to delete short noises, for example.CLONE TRACK (Track Duplication)Use this function to duplicate a single track or a stereo track to adifferent track.This copies the entire track, so the IN/OUT/TO points have noeffect.The following parameters are used in this operation.• SOURCE Track (1 to 12, 13/14 to 23/24)• TARGET TrackNOTEIf you choose the same track for both SOURCE Trackand TARGET Track, Same Track appears and theoperation cannot be executed.CLEAN OUT (Delete Track)Use this function to completely erase the selected track.This deletes the entire track, so IN/OUT/TO points have no effect.The following parameters are used in this operation.• TARGET Track (1 to 12, 13/14 to 23/24, ALL)
