Tascam DP-24SD Owner's Manual

Also see for DP-24SD: Troubleshooting supplement

Contents

Tascam DP-24SD Owner's Manual Manual pdf 51 page image

TASCAM DP-24SD 518 - Track EditingMOVE/PASTEThe audio data between the IN and OUT points on the MOVE sourcetrack is removed and pasted on the MOVE destination track startingfrom the TO point. This operation leaves a silence between the IN andOUT points on the MOVE source track.This operation overwrites recorded data on the MOVE destinationtrack. Therefore, the length of the MOVE destination track is notchanged.The following parameters are used in this operation.• SOURCE Track (1 to 12, 13/14 to 23/24, ALL)• IN/OUT/TO• TARGET TrackMOVE/INSERTThe audio data between the IN and OUT points on the MOVE sourcetrack is removed and inserted in the MOVE destination track startingfrom the TO point. This operation leaves a silence between the IN andOUT points on the MOVE source track.This operation inserts recorded data into the MOVE destination trackstarting from the TO point. Therefore, the MOVE destination trackbecomes longer.The following parameters are used in this operation.• SOURCE Track (1 to 12, 13/14 to 23/24, ALL)• IN/OUT/TO• TARGET TrackOPEN (Insert Silence)This function inserts silence between the IN and OUT points onthe selected track.This function splits the track at the IN point and shifts therecorded data after the IN point to after the OUT point.Therefore, the track becomes longer.The following parameters are used in this operation.• TARGET Track (1 to 12, 13/14 to 23/24, ALL)• IN/OUTCUT (Remove Part)This function cuts (deletes) the audio data between the IN andOUT points on the selected track, and shifts the remainingrecording after the OUT point forward to the IN point. Therefore,the track becomes shorter.The following parameters are used in this operation.• TARGET Track (1 to 12, 13/14 to 23/24, ALL)• IN/OUT