60 TASCAM DP-24SD10 - Mixing Down and Mastering TracksTHRESHOLDSet the threshold value that determines when thecompressor begins to operate.RATIOSet the compression ratio.KNEESelect the transition curve.GAINAdjust the output level.ATTACKAdjust the attack time.RELEASEAdjust the release time.AUTO MAKEThis feature automatically adjusts the volume to prevent itfrom being reduced by the compressor.6. When using the multi-band type, move the cursor toCROSSOVER and then use the JOG/DATA dial to adjustthe frequency range of each band.7. Press the F4 (ON/OFF) button to turn the compressor onor off. The ON or OFF state is shown on the Masteringscreen.8. After setting the parameters, press the F1 (g) button toreturn to the Mastering screen.Compressor ON/OFFUsing normalizeUse the normalize function to automatically adjust the volume.This function detects the highest volume level and raises theoverall volume until the highest level reaches the maximumlimit.CAUTIONIf you use equalization or compression after normalizing thetrack, distortion might occur.Use the normalize function after adjusting the soundquality with equalization and compression.1. When the Mastering screen is displayed, press the F4(NORM) button to open the NORMALIZE screen.2. Press the F2 (YES) button to perform the normalization.3. Once the normalization is completed, the display returns tothe Mastering screen.Exiting Mastering modeTo exit Mastering mode and return to Multi Trackmode, press the MIXDOWN/MASTERING button.
