6 Scanning6-2 Xerox PE220Scanning BasicsYour WorkCentre PE220 offers three ways to scan. These are:• From the control panel on your machine to an application:Use the Scan button on the control panel to initiate scanning. Assign theTWAIN-compliant software, such as Adobe Photo Deluxe or AdobePhotoshop, to the machine by selecting it from a list of availableapplications via the Scan button. To compose the list of availableapplications, you must configure it in the scan settings tab of the PrinterSettings ControlCentre program. For details, see Chapter 5, Printing.• From TWAIN-compliant software:You can use other software including Adobe PhotoDeluxe and AdobePhotoshop. For details, see Chapter 5, Printing.• From the Windows Images Acquisition (WIA) driver:Your machine also supports the WIA driver for scanning images. Fordetails, see Chapter 5, Printing.NOTE: To scan with your machine, you must install the software.1. Insert the Xerox Drivers CD into the CD-ROM drive. In Microsoft Win-dows click Start and then Run. Type E: Xinstall.exe, replacing "E" withthe letter of your CD-ROM drive and click OK.2. When the language selection window appears, select the appropriatelanguage and then click Continue.3. Choose the components you want to install and then click Continue.4. Click Continue.5. Click Finish. The driver installation is now complete.Scanning From the Control Panel to an Application1. Make sure that your machine and computer are turned on and properlyconnected to each other.2. Load the document(s) face up into the ADF, or place a single documentface down on the document glass.For details about loading a document, see Loading Paper on page 2-6.3. Press Scan. The first available menu item, for example “Microsoft Paint”,appears on the display.
