1 WelcomeXerox PE220 1-11Disconnect DeviceThe power cable is the disconnect device for this equipment. It is attached tothe back of the machine as a plug-in device. To remove all electrical powerfrom the equipment, disconnect the power cable from the electrical outlet.Laser Safety InformationCAUTION: Use of controls, adjustments or performance of procedureother than those specified herein may result in hazardous lightexposure.With specific regard to laser safety, the equipment complies with performancestandards for laser product set by government, national and internationalagencies as a Class 1 laser product. It does not emit hazardous light, as thebeam is totally enclosed during all phases of customer operation andmaintenance.Operational Safety InformationTo ensure the continued safe operation of your Xerox equipment, follow thesesafety guidelines at all times.Do These:• Always connect equipment to a correctly grounded power outlet. If indoubt, have the outlet checked by a qualified electrician.• This equipment must be connected to a protective earth circuit.This equipment is supplied with a plug that has a protective earth pin. Thisplug will fit only into an earthed electrical outlet. This is a safety feature.To avoid risk of electric shock, contact your electrician to replace theelectrical outlet if you are unable to insert the plug into it. Never use a plugthat lacks an earth connection terminal to connect the product to anelectrical outlet.• Always follow all warnings and instructions that are marked on or suppliedwith the equipment.• Always exercise care when moving or relocating equipment. Pleasecontact your local Xerox Service Department, or your local supportorganization to arrange relocation of the product to a location outside ofyour building.• Always locate the equipment in an area that has adequate ventilation, andthe room for servicing. For minimum dimensions see Clearance Space onpage 2-3.• Always use materials and supplies specifically designed for your Xeroxequipment. Use of unsuitable materials may result in poor performance.• Always unplug this equipment from the electrical outlet before cleaning.
