4 CopyingXerox PE220 4-3Making Copies on the Document Glass1. Lift and open the document cover.2. Place the document face downon the document glass and align itat the top left corner of the glass.NOTE: Make sure that no documentsare in the ADF (Automatic DocumentFeeder). If a document is detected inthe ADF, the machine gives it priorityover the document on the documentglass.3. Close the document cover.NOTE:• Lower the document cover gently to avoid damage to the machine orpersonal injury.• If you leave the cover open while copying you may affect copy quality andtoner consumption.• If you are copying a page from a book or magazine, leave the cover open.4. Press the Copy button to enter the copy mode.5. Select the copy settings including number of copies, copy size,brightness, and original type, by using the control panel buttons. SeeSelecting Copy Options on page 4-5.To clear the settings, use the Stop/Clear button.6. If necessary, you can use special copy features, such as Poster, Auto Fit,Clone, and ID Card copying.7. Press Start to begin copying. The display shows the copy processing.NOTE:• You can cancel the copy job during an operation. Press Stop/Clear, andthe copying will stop.
