3 Paper HandlingXerox PE220 3-5Loading PaperProper paper loading helps prevent paper jams and ensure trouble-freeprinting. Do not remove the paper in the tray while a job is printing. Doing somay cause a paper jam. See Paper Type, Input Sources, and Capacities onpage 3-2 for acceptable paper size and capacity for the tray.Using the Paper TrayThe paper tray holds 150 sheets of paper.For details about loading paper in the tray, see Loading Paper on page 2-6.To use the special material like envelope, label or card, remove the stack ofplain paper and load one sheet of special material into the tray.Using the Manual TrayWhen you print a document using your PC and want to check the print qualityafter each page is printed, load the paper in the manual tray and selectManual Feed for Source from the print driver.1. Load the print material into thetray. If there is a print side to thepaper it should be face up.Push the print material firmly intothe manual tray.2. Adjust the paper guide againstthe print material without bendingthe material.3. Select Manual Feed for Sourcefrom the software application,and then select the correct papersize and type. For details, seeChapter 5, Printing.4. Send the job to the printer.5. On the machine the display shows “Add Paper & Press Start”. PressStart on the machine to start feeding. Printing is started.6. If you have multiple pages to be printed, the display shows “Add Paper &Press Start” again. Load the next sheet and press Start.Repeat this step for every page to be printed.
