C.1 European StandardsFigure C.1 CE MarkThe CE mark indicates compliance with European safety and environmental regulations. It is required for engaging in businessand commerce in Europe.European standards include the Machinery Directive for machine manufacturers, the Low Voltage Directive for electronicsmanufacturers, and the EMC guidelines for controlling noise.This drive displays the CE mark based on the EMC guidelines and the Low Voltage Directive.• Low Voltage Directive: 2006/95/EC• EMC Guidelines: 2004/108/ECDevices used in combination with this drive must also be CE certified and display the CE mark. When using drives displayingthe CE mark in combination with other devices, it is ultimately the responsibility of the user to ensure compliance with CEstandards. After setting up the device, verify that conditions meet European standards.Note: 600 V class drives (models CIMR-Ao5oooooo) are not compliant with European Standards.u CE Low Voltage Directive ComplianceThis drive has been tested according to European standard IEC61800-5-1, and it fully complies with the Low Voltage Directive.To comply with the Low Voltage Directive, be sure to meet the following conditions when combining this drive with otherdevices:n Area of UseDo not use drives in areas with pollution higher than severity 2 and overvoltage category 3 in accordance with IEC664.n Installing Fuses on the Input SideAlways install input fuses. Select fuses according to Table C.1.Table C.1 Recommended Input Fuse SelectionModel CIMR-AoFuse TypeManufacturer: BussmannModel Fuse Ampere Rating (A)Three-Phase 200 V Class2A0004 FWH-70B 702A0006 FWH-70B 702A0008 FWH-70B 702A0010 FWH-70B 702A0012 FWH-70B 702A0018 FWH-90B 902A0021 FWH-90B 902A0030 FWH-100B 1002A0040 FWH-200B 2002A0056 FWH-200B 2002A0069 FWH-200B 2002A0081 FWH-300A 3002A0110 FWH-300A 3002A0138 FWH-350A 3502A0169 FWH-400A 4002A0211 FWH-400A 4002A0250 FWH-600A 600C.1 European Standards238 YASKAWA ELECTRIC TOEP C710616 41B YASKAWA AC Drive - A1000 Quick Start Guide
